Rubber duckbill valve manufacturers

26/11/2022 LaboratoryRubber duckbill valve manufacturers

RONCAGLIA (R) has a laboratory, where the rubber compounds undergo physical and chemical analysis to confirm that they meet all conditions before being used in the productive sectors of the Company. Degree of hardness, elongation, abrasion resistance, chemical resistance to various products, an aging, placing some of the controls are being performed.
It is also important to note that, in addition to submitting to control all the compounds that are sent to production, the laboratory develops new formulations for new needs, and primarily in response to the policy of continual improvement, which characterizes RONCAGLIA (R).
The laboratory has a rehómetro, oven aging, abrasion tester, tape measure and dynamometer.
It represents a fundamental contribution to the work mancomuncado INTI - Rubber current name of the Center for Research and Technological Development of the Rubber Industry, which Juan Roncaglia SAIC is a founding member. In this Institute, Roncaglia carries out tests to contrast the results of his laboratory with the Institute Oficial.Esto doubly ensures the results beyond the calibration to be detected in only all elements of control.

Rubber duckbill valve manufacturers
Rubber duckbill valve manufacturers

Rubber duckbill valve manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830

Rubber duckbill valve manufacturers Recommend this Page
Rubber duckbill valve manufacturers Bookmark this page!
Guardar en:
Guardar en Marcadores
Rubber duckbill valve manufacturers
Rubber Sleeves
Rubber duckbill valve manufacturers

The most important steel manufacture argentine company has employed the RONCAGLIA® SLEEVE for steel sheets coils winder and de-winder mandrels, since more than 30 years in his five plants.
The use of this rubber sleeve, allows:

1-to protect the steel sheet, the defects caused by the metallic mandrel, on the first loops. When a metallic mandrel is opened against the thin metallic sheets, usually a typical mark has been place, on the first loops, these loops have been rejected.

2-to replace metallic supplements for different I.D. coils.    When it is necessary to produce coils with different internal diameters, the use of Roncaglia® rubber sleeve, instead of such heavy’s metallic supplements, assures faster and safer installation.

3-to protect mechanical mandrel systems. When you use Roncaglia® rubber sleeve, you have an additional advantage; you are protecting the mandrel mechanisms from dust, which can affect the normal operation.   

We are Rubber Sleeves manufacturers

Juan Roncaglia SAIC
Todos los derechos reservados, copyright 2011
Calle 39 N° 2067 Villa Maipú - San Martín Provincia de Buenos Aires República Argentina
Teléfono: (54-11) 4753-1201 - Fax: (54-11) 4752-0830

Last searches: rubber products manufacturers, rubber products, argentine rubber products, rubber products industriesrubber fender supplier, protection sleeves tanks rubber, rubber @, produce sleeves, water email loc ar, rubber manufacturer email -china -india, argentina rubber manufacture, rubber products manufacturers email, rubber gaskets company, rubber products manufacturers email,

Diseño web y optimización