Rubber duckbill valve manufacturers

Rubber duckbill valve manufacturers Rubber duckbill valve manufacturers Rubber duckbill valve manufacturers

Duck bill check valves 27/03/2024Rubber duckbill valve manufacturers

Check valves are used in the installation of hydraulic systems to let liquids flow in one direction but prevent them from flowing in the opposite direction. In many applications these valves - made of steel or cast iron - which are heavy as well as costly and need constant maintenance, are replaced by the so-called Duck Bill Check Valves.

RONCAGLIA(R) Duck Bill Check Valves are manufactured entirely in rubber, using compounds which are highly resistant to different environments.

They weigh 10% or less than regular valves, thus making them more economical, easy to transport, easy to mount and maintenance free.

Due to their convenient design, they are not likely to get stuck should strange elements be swept by the fuids.

They are manufactures from 2 inches up 72 inches diameter.

They do not need external energy to operate.

They are easily mounted at the end line of sewers or storm sewers.

Duck bill check valves manufacturers. Roncaglia rubber products manufacturers.

Duck bill check valves manufacturers. Roncaglia rubber products manufacturers


Ask for: Rubber duckbill valve manufacturers Duck bill check valves
Click here
Last update: 27/03/2024 15:21:36Rubber duckbill valve manufacturers
Rubber duckbill valve manufacturers Rubber duckbill valve manufacturers Rubber duckbill valve manufacturers
Rubber duckbill valve manufacturers

Calle 39 N° 2067 Villa Maipú
San Martín
Buenos Aires - R. Argentina
Phone: (54-11) 4753-1201
Fax: (54-11) 4752-0830



Rubber duckbill valve manufacturers Recommend this Page
Rubber duckbill valve manufacturers Bookmark this page!
Guardar en:
Guardar en Marcadores
Rubber duckbill valve manufacturers
Rubber Sleeves
Rubber duckbill valve manufacturers

The most important steel manufacture argentine company has employed the RONCAGLIA® SLEEVE for steel sheets coils winder and de-winder mandrels, since more than 30 years in his five plants.
The use of this rubber sleeve, allows:

1-to protect the steel sheet, the defects caused by the metallic mandrel, on the first loops. When a metallic mandrel is opened against the thin metallic sheets, usually a typical mark has been place, on the first loops, these loops have been rejected.

2-to replace metallic supplements for different I.D. coils.    When it is necessary to produce coils with different internal diameters, the use of Roncaglia® rubber sleeve, instead of such heavy’s metallic supplements, assures faster and safer installation.

3-to protect mechanical mandrel systems. When you use Roncaglia® rubber sleeve, you have an additional advantage; you are protecting the mandrel mechanisms from dust, which can affect the normal operation.   

We are Rubber Sleeves manufacturers


Juan Roncaglia SAIC
Todos los derechos reservados, copyright 2011
Calle 39 N° 2067 Villa Maipú - San Martín Provincia de Buenos Aires República Argentina
Teléfono: (54-11) 4753-1201 - Fax: (54-11) 4752-0830
E-Mail: caucho@roncaglia.com.ar

Last searches: rubber sleeves, bladders for water hammer, bladders for sewer water, duck bill check valves, defense push boats, pushnee weld on bumpers, protective defense to push boats, epdm peroxid cured gasketmail tmu%2eedu%2ecn loc ar, rubber sleeve in coils, barge pushing boat, rubber companies email, marble granite and tiles suppliers and manufacturers in argentina loc ar, ec21%2ecom loc ar, email china%2dweld%2ecom loc ar, sleeve mandrel, stormwater rubber sleeves , end mark coil rubber sleeve,

Diseño web y optimización www.paginadigital.com.ar